Page 1
® Medion assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Medion This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this docu- ®...
Quality We focused on great features, ease of use and reliability in manufacturing your LCD monitor. The balanced hardware and software concept offers you an advanced display design which will provide you a great deal of pleasure for your work and entertainment. Thank you for your confidence in our products.
Take regular breaks when working with your LCD monitor in order to avoid tension and fatigue. Repair • Leave all repairs of your LCD monitor to authorized and qualified personnel only. • Should a repair be necessary, please contact MEDION Customer Care. English...
Environmental Conditions • The LCD monitor can be operated at ambient temperatures between +41°F and +95°F (5° C to 35° C) and at a relative humidity between 20% and 85% (without condensation). • When switched off, the monitor can be stored between -4°F and +140°F (-20° C - +60° C), up to the maximum height of 39,000 ft (12,000 m) above sea level at a relative humidity between 20% and 80% (without condensation).
Electrical Safety EN 60950 Safety of information technology equipment. • The connection of devices is limited to equipment that complies with EN60950 “Safety of information technology equipment” or EN60065 “Audio, video and similar electronic apparatus. Safety require- ments” • For U.S. / Canadian purposes: The PC should only be connected to equipment which complies with UL 60950 / CAN CSA 22.2 No 60950 Important Additional Safety Instructions When using any electronic equipment, basic safety precautions should always be taken.
The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §§15.101 to 15.109. Trade Name: Medion Type or Model Number: MD 30999 PD Party Responsible: MEDION AG Executed on (Date), at (Place): of February, 2007, Essen...
Getting Started Note Before starting, read the chapter "Safety & Precautions" Attach the Monitor Base Mount the monitor stand as shown in the diagram. Perform this step before connecting the monitor. (Ill.: Mounting the monitor stand) Note You can adjust your LCD monitor a maximum of 20 degrees downward and 5 degrees upward. If you attempt to force the monitor beyond these points, you may damage the monitor and/or stand.
Display Properties ® Display properties is a Windows utility allowing you to adjust settings that control how images are displayed on your monitor. This includes items such as the background image, screen saver, Active Desktop (Web) as well as other settings for your monitor and video card. The program can be started as follows: ®...
Connecting the Monitor Before using your LCD monitor, please read the "Safety and Precautions" section (page 2). We recommend that you also read all the other sections as these contain detailed explanations and tips on how to use your LCD monitor. Power Power Audio...
Notes on Ergonomics Please ensure that the monitor is set up in such a way that reflections, glare and light-dark contrast are avoided. (Ill.: Monitor positioning) Your posture Sitting in one position for long periods can be uncomfortable. To minimize the potential for physical discomfort or injury, it's important that you maintain proper posture.
Controls (Ill.: Front view controls) Function Description Menu/Enter Press this button to open the On Screen Display (OSD). When the OSD is active, use this button to confirm selections. Press this button to decrease the speaker volume. When the OSD is active, use this button to move down/decrease selection. Decrease volume Press this button to increase the speaker volume.
Advanced Settings OSD Menu You can change advanced settings for your LCD monitor using the OSD menu. Before adjusting setting using the OSD, you should perform an automatic adjustment by pressing the Auto button. How to operate the OSD menu 1.
Picture • Auto adjust Perform an automatic adjustment by means of the MENU key. The optimal values for Horizontal Posi- tion, Vertical Position, Phase and Clock of your LCD monitor are set automatically. • Brightness Adjust the brightness of your LCD monitor with the keys.
Saving Energy This monitor can be in various states of energy saving by the respective computer or operating system, meet- ing the current requirements for reduction of power consumption. The monitor supports the following states of low energy consumption: Status Power Consumption Color of indicator Standby mode (approx.)
LCD monitor. • Avoid using monitor extension cables. Colors not displayed cleanly: • Check the signal cable pins. If pins are bent, please contact MEDION Customer Care. • Adjust the corresponding settings. • Avoid using monitor extension cables.
Do you require additional Support? If the suggestions in the previous section have not solved your problem, please contact MEDION Customer Care. We will try and help you over the telephone. Our fast & friendly customer care staff will be able to assist you.
Precautions You can increase the service life of your LCD monitor by taking the following precautions: Caution! There are no parts which can be serviced or cleaned inside of the monitor housing. • Before cleaning always disconnect the power line and all connection cables. •...
If you believe the product is defective please return it to MEDION in the manner described below within the limited warranty period. If MEDION determines a defect covered by this limited warranty, MEDION will, at its Option, repair or replace the product.
Page 20
In addition: A cluster of type 3 (= 2 or more defective sub-pixels in an array of 5 x 5 pixel). A cluster is an array of 5 x 5 pixel (15 x 5 sub-pixel). Classes of Pixel Failures: Failure class Type 1 Type 2 Type 3...
Recycling Information When customer decides to leave MEDION obsolete products for recycling from Europe, please call to the listed places in Europe. Deutschland / Germany Norwegen /Norway Hellmann Process Management GmbH & Co. KG Danrec A/S Adolf-Köhne-Str. 11 Bogøvej 10 49090 Osnabrück, Germany...
Page 22
España / Spain: France / France: Firma /Company: Hellmann Worldwide Logistics, S.A. Firma: Heppner Overseas Adresse /Address: Zona Franca Calle No 5-3a Sub- Adresse: aéroport de Bordeaux-Merignac Aérogare de Zona fret - Cidex B26 Stadt /City: 08040 Barcelona Stadt: 33700 Merignac Aéroport Telefon: +34 93 2643870 Telefon: +33 556 12 42 99 Fax: +34 93 2643770...
TCO Development Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance prod- uct, designed with the user in focus that also minimizes the impact on our natural environment.
Need help?
Do you have a question about the MD 30999 PD and is the answer not in the manual?
Questions and answers