Related Manuals for Xiaomi IMILAB CMSXJ11A
Summary of Contents for Xiaomi IMILAB CMSXJ11A
- Page 1 IMILAB Wire-Free Home Security Camera & IMILAB Wire-Free Camera GateWay User Manual...
- Page 2 Read this manual carefully before use, and retain it for future reference Product Overview Loudspeaker Photosensor Lens PIR sensor Status indicator Front view Rear view Base Power (Adjust the camera's field of USB port view/FOV by rotating) Note: The protective film of PIR sensor is easy to be scratched, do not touch it easily.
- Page 3 Cable interface MicroSD slot Status indicator USB charging Reset button Cooling holes port Note: Use MicroSD cards produced by reliable manufacturers (maximum support capacity is 64G, only support FAT32 format). It is recommended that the memory card read and write speed should be no lower than U1/Class10.
-
Page 4: Product Installation
Product Installation Within the coverage of gateway signal, IMILAB Wire-Free Home Security Camera can be installed indoor using wall accessories or outdoor, without power socket. Place gateway nearby router, distance between camera and gateway should be 1~15 meters (no shelter or interference). Installation on wall 1. - Page 5 2. Insert the two anchors in the holes on the wall. 3. Make sure to position the gasket and then secure it in place by tightening the screws into the plastic anchors. 4. Match the grooves on the bottom of the camera with the raised area on the gasket.
- Page 6 When mounting the security camera on a wall: To prevent accidental injury, the device must be securely anchored to the wall following the instructions. The wall must be able to support at least triple the product's total weight. Don't install device near any heat source such as air conditioner external unit, air outlet of both range hood and gas water heater, etc.
- Page 7 Or search "Mi Home / Xiaomi Home" in the app Store to download and install it. Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia).
-
Page 8: Add Gateway
Add gateway Method one: Open the home page of Mi Jia app, click "+" in the upper right corner to enter Add device page, click the button " " in the upper right corner and quickly add gateway by scanning the QR code on the previous page or the QR code on the bottom of the camera. - Page 9 Configure the account and password of wireless network following the instructions in the app. Blue light indicates that gateway is connected, flashing yellow light indicates that connection failed.After wireless network is configured, the gateway will automatically switch to wired connection when users connect the network cable into the interface at the back of gateway, network transmission rate and stability can be improved.
- Page 10 Add camera Click "IMILAB Wire-Free Camera GateWay" in the home page of Mi Jia app to enter Add Camera page, click "Add now", long press the camera 06:20 Camera power button for 2 seconds, then the camera is ready to connect, the indicator is flashing blue;...
- Page 11 Mi Home app or Mi AI. Please be noted that the product herein is certified by the app interaction only. Xiaomi and Mijia are not responsible for any of the product manufacturing, safety and regulatory standards,...
-
Page 12: Indicator Light
Indicator Light Gateway indicator status (connect with Mi Jia app) Device status Light status Power plugged in Steady yellow on Connecting Flashing blue Connected Steady blue on Waiting for connection/ Flashing yellow Connection failed Gateway indicator status (quick connect with camera) Device status Light status Waiting for connection/... - Page 13 Gateway reset button Reset: Long press for 8 seconds, if the indicator flashes yellow, that means the gateway is sucessfully reset. Camera power button Power on: Long press for 2 seconds, if the indicator flashes tgreen once, that means the camera is on. Power off: Long press for 2 seconds, if the indicator flashes red once, that means the camera is off.
-
Page 14: Real-Time Monitoring
Real-Time Monitoring Launch the Mi Jia app and select a connected "IMILAB Wire-Free Home Security Camera"-"IMILAB Wire-Free Camera Gateway" to monitor the surroundings in real- time. Through the camera's control interface, users can perform screen 06:20 IMILAB Wire-Free Home ... 12MB / s capture, screen record and remote communication, etc. - Page 15 Supporting Infrared Night Vision The camera will be automatically switched to night vision mode by IR-CUT according to the ambient light changes that captured by the photosensor. With the incorporation of eight infrared illuminators, the security camera is able to view up to a distance of 9m and capture crystal clear images in the dark.
- Page 16 Mi Jia app, you can set your security camera as a shared device under the General Settings menu, and invite your friends to view the camera remotely. Your friends will be required to download the Mi Jia app and log in with his/her Xiaomi account. 10:15 10:19 Share...
-
Page 17: Automatic Monitoring
Automatic Monitoring Configure this feature through the Mi Jia app " IMILAB Wire- Free Camera GateWay "- " IMILAB Wire-Free Home Security Camera " -"Automatic Monitoring". This device is able to detect movements within its field of view. Once movements are detected, a video is recorded and you will receive a notification. - Page 18 Precautions The suitable operationg temperature range for this product is between -20℃~50℃. Don't use the product in an environment with temperatures above or below the specified range. When charging, the operating tempreture range for this product is between 0°C~ 45°C. Don't charge the product in an environment with temperatures above or below the specified range.
- Page 19 structures, microwave ovens, or other locations where signal strength may be impacted. Don't replace the battery in camera yourself—if not properly replaced, there is a danger of explosion. Battery (battery pack or batteries) must not be exposed to sunlight, fire, or similar overheating conditions. This product is a low power consumption camera with battery built-in.
-
Page 20: Specifications
Specifications Name: IMILAB Wire-Free Home Security Camera Lens Angle: 120° Model: CMSXJ11A Resolution: 1080P Aperture: F 2.6 Power Input: 5 V Net Weight: 270 g Item Dimensions: 140.4 x 47 x 73 mm Video Encoding: H.264 Operating Temperature: -20 °C ~ 50 °C Name: IMILAB Wire-Free Camera GateWay Power Input: 5 V Model: CMSXJ11AG...