Operation Instructions - Xiaomi Mi Robot STYTJ02YM User Manual

Operation Instructions

1. Startup/shutdown
The robot will start up automatically while it is being charged on the charging dock.
The robot cannot shut down while it is being charged on the charging dock.
Long press the Power Button; the power indicator light comes on, and the robot enters the power-on state; after startup, a prompt tone will be heard.
When the robot is stationary, long press the Power Button to shut it down; there will be a voice prompt indicating shutdown.
2. Cleaning
1. In power-on state, short press the power button; the voice prompt "Enter global cleaning" will be heard.
2. In power-on state, short press the Recharge Button; the voice prompt "Enter recharge mode" will be heard.
3. Enter the device home page via the App; click the "Start" button to start cleaning. The voice prompt "Enter global cleaning" will be heard.
4. Enter the device home page via the App; click the "Recharge" button to start recharging. The voice prompt "Enter recharge mode" will be heard.
* In case of low battery, the cleaning function cannot be enabled.
3. Recharging
1. When the robot finishes cleaning, the voice prompt "Cleaning is finished. Enter the recharge mode" will be heard. The robot will get recharged
automatically.
2. In case of low battery during cleaning, the robot will get recharged automatically; after it gets fully charged, it continues where it stops previously.
3. The robot shuts down automatically if the battery is exhausted, you can manually put back the robot to the charging dock for charging. Please ensure that
the charging electrodes are in good contact.
4. Network configuration & firmware upgrade
Scan the QR code on the robot to download the App; connect the device according to instructions in the App. You can also refer to video guide in store link.
With the App, you can directly query and update the device firmware. During upgrade, ensure that the device is in charging state and that the battery level is
no less than 60%. For update steps, please see the guide provided in the App.
* After successful download, carry out network configuration according to the prompts in the App. When the robot is connected to the Internet, you can use the
App to remotely start cleaning, schedule cleaning and realize other functions.
* The robot does not support WiFi networks at 5.8G frequency band.
* App unbinding: Press the Recharge Button for 5s and release it when a sound is heard; then press the Recharge Button again for 5s, and the voice prompt
"Initialization starts / Initialization successful" will be heard.
6