Table of Contents
Advertisement
AXYS
IndustryAmp-DN User Manual Rev 3.0
®
INTRODUCTION
Thank you for purchasing this AXYS
In order to get the best out of your IndustryAmp, please
take the time to read through this manual before you
install and use it for the first time.
APPLICABLE MODELS
This manual covers the installation and operation of the
following models:
•
IndustryAmp Model PB-400-DN (Part No. TUN-
590404): 2 analogue inputs plus dual-redundant
Dante
interface, 4 x 250 W output into 40 ohm load
™
•
IndustryAmp Model PB-800-DN (Part No. TUN-
590404): 2 analogue inputs plus dual-redundant
Dante
interface, 8 x 100 W output into 100 ohm load
™
201911/IAMPDN_3.0
IndustryAmp.
®
OVERVIEW
The AXYS
IndustryAmp is a multichannel power amplifier
®
specifically designed for permanent installation in life-
safety and other critical applications. It is designed to drive
loudspeakers in distributed 70 V or 100 V line systems. The
core of the amplifier is a DSP (Digital Signal Processing)
block, which allows comprehensive adjustment of the
audio signals in each channel. The unit also incorporates
a number of fail-safe features, making it very reliable and
suitable for use in life-critical situations.
The IndustryAmp is configured, controlled and monitored
using AXYS
WinControl software, via the Dante
®
interfaces.
Ethernet
™
5
Advertisement
Table of Contents
