Appendix; Technical Specifications; Maintenance And Warranty Information; Common Analogue Grounding Issues - Harman AXYS TUNNEL IndustryAmp Dante TUN-590404 Installation & User Manual

Table of Contents

Advertisement

AXYS
IndustryAmp-DN User Manual Rev 3.0
®

APPENDIX

TECHNICAL SPECIFICATIONS

Full technical specifications on all models are available at:
www.axystunnel.com;
MAINTENANCE AND WARRANTY
INFORMATION
Maintenance
Maintenance should only be performed by qualified service
personnel. In case of doubt always contact your dealer.
Warranty Information
This IndustryAmp is covered by Harman Professional's
standard product warranty, and is subject to the terms and
conditions of the warranty.
Please consult
www.axystunnel.com
of warranty policy.
201911/IAMPDN_3.0
for a full statement
COMMON ANALOGUE GROUNDING
ISSUES
Correctly connecting the IndustryAmp to ground has
several benefits. A full discussion of the issues involved can
be found at www.axystunnel.com;
Basic points to observe are:
1. Safety. The GND terminal of the PowerCon
connector provides a direct low impedance path from the
metal parts of the chassis to ground. Always connect this
terminal.
2. Reduction of RF emission. Although the IndustryAmp
electronics are well shielded and external connections are
decoupled to prevent RF emission from the internal high
speed digital circuits, this protection will not work properly
if the chassis is not connected to ground.
3. RF Immunity. RF currents induced in the signal cables by
external RF fields are effectively shorted to chassis ground,
provided that the cable screen (shield) is of sufficiently low
impedance.
The pins with a
symbol on the audio line input
connectors and the ambient SPL mic connector are
connected internally directly to the chassis of the amplifier.
These pins are for connecting the screen (shield) of the
audio cables.

SOFTWARE AND FIRMWARE UPDATES

The AXYS
WinControl (User version) application is freely
®
available and can be downloaded from the download
area of our website; www.axystunnel.com. We advise
installers, users and engineers to check our site regularly
for updates. For further information about how to use
WinControl please refer to the WinControl Help files.
mains
®
19

Advertisement

Table of Contents
loading

Table of Contents