Table of Contents
Advertisement
BU-150
Amplifier/Subwoofer
Figure 7.
- Use this method when
c o n n e c t i n g t w o s u b w o o f e r s t o
satellites.
If you are using two subwoofers as a
stereo pair with a pair of satellites, connect
them as shown in Figure 7.
The subwoofer has a variable frequency
control that can be used to block unwanted
frequencies (between 50 - 150Hz) from
being reproduced by the subwoofer.
When you set this control depends on the
low-frequency capabilities of your satellite
speakers. Adjust this knob to the lowest
frequency that you satellite speakers were
designed to reproduce (refer to Operation,
step 7).
1 0
Hide quick links:
Advertisement
Table of Contents
