3.8.6.1 Charging A Telephone Via The Front Light - ION PMU4 User Manual

- Hold the pressed for 3 seconds.
- Use the and
menu.
- Use the to go right.
- Use the ( and)
- Again press the
- Select the required option using
.
- Again press the
option.
- Press the several times to return to the basic display.

3.8.6.1 Charging a telephone via the front light

Your headlamp is equipped with a USB
port* for charging your phone, for example.
You will need a cable for this. You can use
the same one that you use for charging
your phone.
Your phone will only charge when the light
is burning. The lighting is powered from the
battery pack on your e-bike and is set to
Always on by default. This ensures that your
phone can charge while your are cycling.
When the bike is stationary, the lights will go out automatically after 5
minutes. Charging will also stop.
You can also opt to set the lighting to Automatic via the menu (see section
3.8.6). The bike lights will be on or off depending on the ambient light. The
phone will not charge when the lights are off.
The extent to which the phone can be charged depends on the type of
phone and how intensively it is used. The majority of phones are charged in
standby mode (no navigation and screen off). Your phone will charge slower
than with your original charger. Using navigation, so using the phone screen,
consumes more power than can actually be recharged. Your phone will
therefore run out of power, but not as quickly as when you do not recharge it.
*Optional.
to go to the Functions
to go to Lighting.
.
and
to set the required
73
FUNCTIONS
Trip counter
Sound
Lighting
Automatic charging