Display Ion; Removing And Fixing; Adjustment - ION PMU4 User Manual

3

Display ION

This chapter gives information about the display with ION on it.
Chapter 4 is about the brand specific display. That probably is Batavus,
Ghost, Hercules, Koga or Sparta.
3.1

Removing and fixing

Removing: Press the button (A) on the
rear side and pull up the display (B) from
the display holder (C) as shown in the
adjacent figure (left arrow).
Tightening: Position the bottom side of
the display (B) in the display holder (C)
and, next, press the display down so that
the display holder clicks as shown in the
adjacent figure (right arrow).
The contact surface between the display
and the display holder must be free from
dirt and moisture to make sure the e-bike
works correctly. Use a clean cloth to clean it
if required.
3.2

Adjustment

Slightly loosen the 2 screws (D). Hold on
to both the display (B) and the display
holder (C) to turn them both. The display
does not need to be removed.
Remove the display when
storing and transporting the
bike.
B
A
C
B
62
C
D
D