Trip Counter; Sound - ION PMU4 User Manual

- Press the several times to return to the basic display.
3.8.4

Trip counter

The trip counter will keep track of the information of the current trip, for
example, the trip distance (see § 3.6.2) and trip time (see § 3.6.3.). You can
select an automatic or manual reset.
If you select Automatic reset, the trip
counter will be reset automatically when the
bike is not used for longer than 2 hours.
If you select Manual reset, make sure that
the "trip distance" or "trip time" option is
displayed on the display. Next, hold the
pressed for 3 seconds. The trip counter will
now be reset to 0.
- Hold the pressed for 3 seconds.
- Use the and
Functions menu.
- Use the to go to Trip counter.
- Again press the
- Select the required option using the
and .
- Again press the
option.
- Press the several times to return to
the basic display.
3.8.5

Sound

You can set whether (and in which cases) you want to hear sound under
Sound.
If you select Always on, the display will emit five long beeps when there is a
message. In addition, you will hear a short beep when you press the buttons
of the control unit, after calibrating and after resetting a trip.
If you select On alerts, the display will emit five long beeps when there is a
message. Your display will not emit a beep if you press the buttons of the
control unit, after calibrating and after resetting a trip.
If you select Off, the display will not emit any beeps.
to go to the
.
to set the required
71
0:00 0%
0
Trip time
0:00
km/h
.0
0
FUNCTIONS
Trip counter
Sound
Lighting
Automatic charging