Lighting - ION PMU4 User Manual

- Hold the pressed for 3 seconds.
- Use the and
menu.
- Use the to go right.
- Use the ( and)
- Again press the
- Select the required option using
.
- Again press the
option.
- Press the several times to return to the basic display.
3.8.6

Lighting

You can set whether you always want the lights to be on or that they go on
automatically under Lights.
If you select Always on, the bike's lights will always be on.
If you select Automatic, the bike's lights will be switched on and off
automatically. The light sensor continuously measures the quantity of light
and will switch the lights on and off based on this information.
The lights (both at the front and rear) are supplied with power from the
battery pack and will, therefore, only work when the battery pack and display
has been installed in the e-bike. The motor will work as a dynamo when the
battery pack is fully discharged*.
The rear light is fixed to the battery pack. Some bikes have a rear light
that projects a V shape onto the ground (only visible in the dark). This
light enables the traffic coming from behind to judge the distance to the
bike better and creates a safe zone around it. Never look directly into the
lenses of the rear light when it is on! If you need to replace the rear light, we
recommend contacting your certified e-bike dealer.
The rear light has 2 positions: daylight and nightlight. Depending on the
ambient light, the headlamp automatically switches between daylight and
nightlight. The LED strip and the LED in the centre of the lamp lights up in
both positions. The LED light in the centre of the lamp burns brighter in night
mode.
*Works only on e-bikes with a front- or rear wheel motor. Middle motor: p.58.
to go to the Functions
to go to Sound.
.
and
to set the required
72
FUNCTIONS
Trip counter
Sound
Lighting
Automatic charging