Diagnosis Message - ION PMU4 User Manual

- Charge-up reminder: message generated if the small battery of the
module must be charged up. For this purpose, slide the battery pack into
the luggage rack. See §2.2.
- Service reminder direct to your mobile: message generated if it is time for
a servicing session.
- Geofencing: message generated if your e-bike goes into or moves out of
an area which you yourself have specified.
- Track and trace: trace your e-bike by means of GPS. Gain insight (via the
app) into the current location of your e-bike.
- Bike's history: see where you have cycled, going back as far as one year
in the past.
You buy bikes equipped with the connect module ready for use. It is not
possible to fit the module onto your bike later.
2.7

Diagnosis message

If all the LED lights on the battery pack
flash, first check whether the
battery pack (A) has been connected
correctly to the contact point of the
docking station (B).
If the LED lights continue to flash,
contact your dealer.
The contact surface between the
battery pack and the docking station
must be free from dirt and moisture to
make sure the e-bike works correctly.
Use a clean cloth to clean it if required. Much moisture and dirt can lead to
contact problems and/or faults.
NB: the contact point (A) on the battery pack is magnetic and provides an
optimum connection between the battery pack and the docking station.
Metal particles are therefore attracted to contact point easily. Check the
contact points thoroughly for dirt, particularly when you have charged the
battery pack when disconnected from the bike.
A
61
B
LED