Table of Contents
Advertisement
Left box figures
Basic data
Diagnostics buttons
3EC 17545 AAAA TCZZA Ed. 02
In the left box, the following figures can be displayed:
Data
Description
Indicates that your STUSB is not (properly) connected to your
PC, or malfunctioning.
Note: To solve the problem, reconnect your STUSB to the PC.
Non spinning
and the modem software is loaded, but your ADSL link is not
active.
Spinning
connection.
In the case of a spinning globe (physical connection), the
following data are displayed:
Data
Description
Bytes Sent
Shows the number of bytes you sent over the ADSL link.
Bytes Received Shows the number of bytes you received over the ADSL link.
The following buttons are available:
Button
Functionality
To update all diagnostical data.
This invokes the data to be updated to the current condition
of the connection.
Note: This button applies only if the 'Screen update' box of
the 'Properties' menu is unflagged.
See subsection 3.2.2 for more information.
To reset all diagnostical data.
This is used to start a new reading of data.
Pops up an extension to the Diagnostics window.
Closes the extension to the Diagnostics window.
3 Speed Touch USB Diagnostics
globe: Your STUSB is connected to your PC,
globe: Your STUSB has established the ADSL
31 / 60
Advertisement
Table of Contents
