Advertisement
JC MACHINERY & TOOLS INC.
vii.
The adjustment of the Pressure Wheel
According to the various thickness of material, it can be adjusted the magnitude of
pressure by switching the modulated screw. It will increase by clockwise, and it
decrease by anticlockwise.
viii.
The Familiar Malfunction and Elimination
Phenomena
NO turning of the
electric machine
Non speeding of the
electric machine
Non heating up
Thermal wedge
The burning of thermal
wedge
ix.
Maintenance
Please clean the dunghill in the thermal wedge and the mud in the chain guard and
oiled the whole machine to the dry place when not using it.
x.
Supplied Accessories
Insurance pipe
Screw drive
Interior hexangular spanner
Reason
Non direction of power supply
The damage of Insurance wire by
burning
The damage of speeding circuitry
board lines By burning
The damage of electric machine by
burning
Speeding knob is unsightly
Power pipe was shocked out
The damage of electric pipe by
burning
The damage of temperature
control instrument
Thermocouple with malfunction
The damage of temperature
control instrument
15A
0.75A
Quality We Trust
The way of eliminate
Check the power supply whether it
is connected or not
Change the insurance wire
Change the speeding circuitry
board
Change the electric machine
Tight the speeding knob
Replacing the speeding wire board
Replacing the electric pipe
Replacing the temperature control
instrument
Change the thermocouple
Change the temperature control
instrument
5pcs
5pcs
1pcs
2pcs
6
Advertisement
