Advertisement
JC MACHINERY & TOOLS INC.
the pressure wheel to made the thermal-fused mother material together. The
picture is as follow:
vi.
Operating Criteria
Notice: In order to obtain the excellent quality and high efficiency, it should be
manipulated by professional people since the welding quality of the machine has
direct relationship with the enactment of speed and temperature.
The user must choose to the three holes receptacle with earthing and confirm
1.
the good connection of exterior wire. Pick the pressure handle up to separate
the up and down iron wheels and then plug the power supply on.
Switch power supply on, and choose suitable temperature (Temperature
2.
adjusting diagram – literature) and speed. Then pick some narrow material to
weld for a try and make sure the best effect. Owing to the difference between
the environmental temperature and the thickness of material, the welding
temperature of the same material could be different. We can choose to a
referenced speed (about 1.5m/min) when select the temperature. And then
slowly adjust the temperature from low to high, about from 250℃ to 400℃
(482 to 752℉)
The estimation of the welding temperature: it can be directly watched the
3.
transparence PE material .If the welding mark is lever-off with transparence glass
status, it showed that the temperature and the speed is suitable; if the welding
mark is seriously broken up, it showed that the temperature is too high or the
speed is too low; If the welding mark is not transparence with white status, it
showed that the temperature is on the slow side or the speed is on the fast
Quality We Trust
4
Advertisement
