Neopost iMeter IM-280 Replacement Part Manual

The following steps will guide you through the removal of the scale and the installation of a new scale.
Shipping Package Contents
1 - Scale
1 - Prepaid Shipping Label
Replacing The Scale
1. Ensure the machine is in
sleep mode. The power
indicator light will be
amber.
2. Disconnect the power
cable from the wall
outlet. This will turn off
the IM | IS-280 iMeter™
postage meter.
3. Remove the scale's
cable from the
component cavity.
4. Disconnect the old
scale's cable from the
port of the IM | IS-280
iMeter™ postage meter.
© 2011 Neopost USA Inc. All rights reserved. No part of this document may be reproduced or distributed in any form or by any means.
IM | IS-280 iMeter™ Postage Meter
Replacement Part Guide – Scale
For interactive step by step instructions, visit:
www.neopostinc.com/280helpdesk/
www.haslerinc.com/280helpdesk/
(for Neopost customers)
(for Hasler customers)
Scale Components
5. Remove the new scale and shipping label from
the shipping package.
6. Place the old scale into the same shipping
package. Seal the package with packing tape
(not provided). Apply the prepaid label to the
package over the old shipping label.
7. Connect the new
scale's cable to the
port of the IM | IS-280
iMeter™ postage
meter.
8. Tuck the new scale's
cable into the
component cavity.
IM | IS 280 iMeter™
Postage Meter
(back view)
Scale