Acura MDX SPORT HYBRID 2018 Owner's Manual page 29

VEHICLE CONTROLS
HomeLink Universal Transceiver
®
Program your vehicle to operate up to three remote-controlled devices around your
home—such as garage doors, lighting, or home security systems—using the buttons
on the ceiling.
Training a Button
Park near the system you want to program and follow the instructions in the
flowchart below:
1
Position the remote transmitter
1–3 inches (3–8 cm) from the
HomeLink button you want to program.
2
Press and hold the desired HomeLink
button and the button on the remote
transmitter.
Does the HomeLink indicator (LED) blink at a faster
rate after about 10 seconds?
NO YES
a
Press and hold the button on the remote
and the HomeLink button at the same
time. Then, while continuing to hold the
HomeLink button, press and release the
button on the remote every 2 seconds.
Does the LED blink at a faster rate within 20 seconds?
NO YES
To retrain a button or erase codes, see the Owner's Manual at owners.acura.com
(U.S.) or myacura.ca (Canada). If you need help, call HomeLink at (800) 355-3515
or visit www.homelink.com
HomeLink is a registered trademark of Gentex Corporation.
50 |
Indicator HomeLink buttons
3 Press and hold the programmed
HomeLink button for about a second.
Does the device (garage door opener) work?
NO YES
4
Training
Press and hold the
complete
HomeLink button
again.
HomeLink indicator
HomeLink LED
flashes for 2 seconds, remains on.
then remains on.
a
The remote has a rolling code. Press
the "learn" button on the
remote-controlled device (e.g., garage
door opener).
b
Within 30 seconds, press and hold the
programmed HomeLink button for 2
seconds.
5
Press the programmed HomeLink button
again; the remote-controlled device
should operate. Training complete.
Climate Control System
Set your preferred interior temperature by selecting the proper mix of heated or
cooled air and fan speed.
Front Operation
Use the On-Demand Multi-Use Display (ODMD) touchscreen or the buttons
below the screen to operate the system.
On-Demand Multi-Use Display (ODMD)
When you select a climate control icon, a new screen appears where you can make
adjustments or change settings.
Vent mode
icon
Driver's side
temperature
A/C: Turn the air conditioning on or off.
SYNC: Set the passenger's side temperature
to the same as the driver's side.
Climate control buttons
Driver's side AUTO button: Press, then
temperature switch adjust the temperature to
your preferred setting.
ON/OFF Windshield
button defroster
button
VEHICLE CONTROLS
Passenger's side
temperature
Fan Recirculation/
speed fresh air mode
Passenger's side
temperature switch
Rear window
defogger/heated
mirror button
| 51