Field Wiring Box / Access / Panel Removal / Main Power Switch / Temp. Control - Oasis FSC463R Installation & Operating Manual

FIELD WIRING BOX / ACCESS / PANEL REMOVAL / MAIN POWER SWITCH / TEMP. CONTROL

1. Field Wiring Box / Access
 Warning! Turn power off and/or disconnect
power before providing maintenance and
service to unit.
 Assembly/disassembly/servicing to be
performed by licensed electrical contractor.
 Panel must be removed to access field wiring box
and main power switch.
 See illustration below.
2. Panel Removal
 To remove panel (and access field wiring box), lift
panel up and off case hooks by grasping firmly
and pulling up and outward.
 See illustration at top-right.
Field Wiring /
Ballast Box
Self-Contained Merchandiser
(Partially Disassembled)
3. Main Power Switch
 For self-contained cases, the main power switch
controls power to entire case.
 If main power switch is not turned on, lights will
not turn on NOR will refrigeration components
operate.
 See illustration below.
4. Temperature Control
 Illustration below shows location of temperature
controller (after removal of front panel).
 See Carel Temperature Controller information
in this manual for specifics on settings.
Slots For Attaching
To Case Hooks
Main Power
Switch
7
Removable Front Panel
Thermostat Controller &
Main Power Switch