Digital Thermometers / Security Cover Installation & Removal - Oasis FSC463R Installation & Operating Manual

DIGITAL THERMOMETERS / SECURITY COVER INSTALLATION & REMOVAL
1. Digital Thermometers
Digital thermometers are located on rear plenum at
upper area of case.
 Digital thermometers are on BOTH side of case.
 See enlarged illustration at lower-left.
2. Security Cover Installation (Optional)
A. Place security cover inside lower retainer brack-
et. See illustration of random unit with
retainer bracket at below-right.
B. Lean security cover against header at top of unit.
C. With key inserted in the lock, rotate the locking
mechanism's "flat bar" into the bracket with slot at
center of case. See illustration at top-right and
mid-right.
3. Security Cover Removal (Optional)
A. With key inserted in the lock, rotate the locking
mechanism's "flat bar" out of the bracket with slot
(as shown in top-right illustration).
lower
Digital
Thermometer
Header
B. Lean security cover away from header at top of
unit.
C. Holding security cover handles (or grasping sides
of security cover, if no handles), lift security cover
up and away from header. See illustration
below-right
Sample View of
Lower Retainer
Bracket (Rotated
For Illustrative
Purposes Only)
10
Locking
Mechanism With
"Flat Bar" To
Lock Into Slot
Bracket
With Slot
For Latch
Key & Locking
Mechanism
Security
Cover