Table of Contents
Advertisement
REMOVAL OF CASE FROM SKID / POSITIONING UNIT
1. Remove Unit From Skid
For your safety, the equipment is furnished with
a properly grounded cord connector. Do not
attempt to defeat the grounded connector.
Caution! Remove BOTH lower panels from case
before removing from skid to prevent buckling.
Illustrations below show case being removed
from skid.
Slide Skid Out
From Under
Case
Place case in proper location.
Plug cord into certified electrical outlet with ground.
2. Positioning Unit
Place unit into desired location before leveling.
See next page for specifics about leveling.
5
Advertisement
Table of Contents
Troubleshooting
