Table of Contents
Advertisement
Quick Links
Operating instructions
Solenoid interlock
Operating instructions. . . . . . . . . . . . .pages 1 to 8
EN
Original
Content
1
About this document
1.1 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.2 Target group: authorised qualified personnel. . . . . . . . . . . . . . . . . .1
1.3 Explanation of the symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.4 Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.5 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.6 Exclusion of liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
2.1 Ordering code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.2 Special versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.3 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.4 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.5 Safety classification of the interlocking function. . . . . . . . . . . . . . . .3
2.6 Safety classification of the guard locking function . . . . . . . . . . . . . .3
3
3.1 General mounting instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3.2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4
4.1 General information for electrical connection. . . . . . . . . . . . . . . . . .4
5
5.1 Mode of operation of the safety outputs. . . . . . . . . . . . . . . . . . . . . .5
5.2 Magnet control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
5.3 Programming the slave address . . . . . . . . . . . . . . . . . . . . . . . . . . .5
5.4 Configuration of the safety monitor . . . . . . . . . . . . . . . . . . . . . . . . .5
5.6 Read-out of the parameter port . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
6
6.1 Functional testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
6.2 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
7
7.1 Disassembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
7.2 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
8
EU Declaration of conformity
1. About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety switchgear. The operating
instructions must be available in a legible condition and a complete
version in the vicinity of the device.
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only.
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation.
The machine builder must carefully select the harmonised standards
to be complied with as well as other technical specifications for the
selection, mounting and integration of the components.
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information.
Caution: Failure to comply with this warning notice could
lead to failures or malfunctions.
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine.
1.4 Appropriate use
The products described in these operating instructions are developed to
execute safety-related functions as part of an entire plant or machine. It
is the responsibility of the manufacturer of a machine or plant to ensure
the correct functionality of the entire machine or plant.
The safety switchgear must be exclusively used in accordance with
the versions listed below or for the applications authorised by the
manufacturer. Detailed information regarding the range of applications
can be found in the chapter "Product description".
1.5 General safety instructions
The user must observe the safety instructions in this operating
instructions manual, the country specific installation standards as well
as all prevailing safety regulations and accident prevention rules.
Further technical information can be found in the Schmersal
catalogues or in the online catalogue on the Internet:
www.schmersal.net.
The information contained in this operating instructions manual is
provided without liability and is subject to technical modifications.
There are no residual risks, provided that the safety instructions as well
as the instructions regarding mounting, commissioning, operation and
maintenance are observed.
EN
AZM 161 AS
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for schmersal AZM 161 AS
Summary of Contents for schmersal AZM 161 AS
-
Page 1: Table Of Contents
Functions and configuration Further technical information can be found in the Schmersal 5.1 Mode of operation of the safety outputs..... .5 catalogues or in the online catalogue on the Internet: 5.2 Magnet control . -
Page 2: Exclusion Of Liability
Triangular key TK-M5 (101100887) available as accessory. 2.3 Purpose The AZM 161 AS is designed for use with AS-Interface Safety at Work. The safety switchgears are classified according to ISO 14119 as type 2 interlocking devices. The different variants can be used as safety switch with interlocking function either as solenoid interlock for the position monitoring and locking of movable safety guards. -
Page 3: Technical Data
Operating instructions Solenoid interlock AZM 161 AS Emergency release AS-interface inputs: Databits D0...D3: condition static 0 or dynamic (Mounting and actuation only outside of the safety guard) code transmission SaW AS-interface outputs: Bit 0: magnet control solenoid interlock; The emergency release should only be used in an Bit 1 ... -
Page 4: Mounting
The electrical connection may only be carried out by authorised personnel in a de-energised condition. The AZM 161 AS is supplied from the AS-Interface cable. The energy for the locking magnets is either supplied separately (AUX) (ordering suffix P) or through the AS-Interface cable. Both voltage supplies of the solenoid interlock must be equipped with a protection against permanent overvoltage. -
Page 5: Functions And Configuration
0 of the addressed AS-i reflected parameters or the answer to a "Write parameter instruction" can slave AZM 161 AS. In the power to lock variant of the AZM 161 AS, be used by the user for diagnostic purposes or for the control programme. - Page 6 Operating instructions Solenoid interlock AZM 161 AS System condition Magnet input Channel 1 Channel 2 SaW code AS-i FID Parameter port AS-i D Out: 0 Yellow LED Yellow LED Reset Red LED Safety guard open Safety guard closed Safety guard locked...
-
Page 7: Set-Up And Maintenance
Operating instructions Solenoid interlock AZM 161 AS 6. Set-up and maintenance 6.1 Functional testing The safety function of the safety components must be tested. The following conditions must be previously checked and met: 1. Check the switch enclosure for damage 2. - Page 8 Philip Schmersal Managing Director The currently valid declaration of conformity can be downloaded from the internet at www.schmersal.net. K. A. Schmersal GmbH & Co. KG Möddinghofe 30, D - 42279 Wuppertal Postfach 24 02 63, D - 42232 Wuppertal Phone:...
Need help?
Do you have a question about the AZM 161 AS and is the answer not in the manual?
Questions and answers