Let's Get Started - Logiblocs Super Inventor's Inventors Manual

The first thing to do is to get to know the Logiblocs and make sure
that they are working OK.
You will need four 1.5V AA size batteries.
Step 1
Open the BATTERY BOX and put the
batteries in. See the section on battery
installation near the end of this booklet.
Step 2
Plug in the BATTERY BOX
to the CROSS
Step 3
Plug in a BUTTON and
a BLEEP block.
When you press it the light on
the CROSS should come on.
If this doesn't happen,
check that the batteries
are put in correctly.
If you still have trouble,
maybe your batteries are flat !
We will use this Logitest unit to test
if all the other blocks are working OK.
8

LET'S GET STARTED

BUTTON
CROSS
BLEEP
BATTERY
BOX
THE
LOGITESTER