Table of Contents
Advertisement
Note:
– If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
– The selected audio format of the DVD is displayed in the
Status Window when the Menu OSD is activated or Audio
button is activated.
– Six Channel Digital Surround Sound via digital connection
can only be obtained if your receiver is equipped with a Digital
Multi-channel decoder.
– To see the selected audio format of the current DVD in the
Status Window, press the MENU OSD or the Audio Language
selector button.
AMPLIFIER
G
F
MULTICHANNEL AUDIO OUT
LEFT
REAR
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
MAINS
RIGHT
OPT OUT
DIG OUT
REAR
Cinemalink (on SCART)
This DVD player is equipped with cinemalink feature (from
Philips) which allows a more complete control of your
home audio/video (AV) equipment.
Cinemalink interconnection plug & play will enable the AV
system to recognise the users intention and automatically
switch the necessary controls or input source accordingly.
This will reduce the necessity of having multiple control
inputs for all AV equipments (eg. TV and Amplifier).
Analog connection to a multi-channel A/V
receiver with 6 CH connectors
This DVD player contains a multi-channel decoder. This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
1
Connect the audio out jacks for Center speaker and
Subwoofer connection (I) to the corresponding in jacks on
your receiver.
Note:
– If the subwoofer is equipped with its own amplifier, the
Subwoofer connection should be connected to the subwoofer
directly.
Connect the audio Left and Right out jacks for Front
speaker connection (H) to the corresponding in jack
sockets on your receiver.
Connect the audio Left and Right out jacks for Surround
speaker connection (J) to the corresponding in jacks on
your receiver.
TV
E
I
AUX-
I
/O
CENTER
LEFT
FRONT
STEREO OUT
VIDEO OUT
II
TO TV-
I
/O
SUBW.
RIGHT
R
L
(CVBS)
(Y/C)
FRONT
AUDIO
VIDEO OUT
S-VIDEO OUT
2
Make the appropriate Sound settings for Analog Output
and Speaker Settings in the Personal Preferences menu.
AMPLIFIER
J
I
MULTICHANNEL AUDIO OUT
LEFT
CENTER
REAR
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
MAINS
RIGHT
SUBW.
OPT OUT
DIG OUT
REAR
Connecting to an amplifier equipped with
Dolby Surround™
Dolby Surround sound
1
Connect the player to the TV, then connect the player's
audio Left and Right out jacks to the corresponding in jacks
on the Dolby Surround™ Audio/Video receiver, using the
audio/video cable supplied (D).
If your amplifier is equipped with a Dolby
Digital™ decoder,
¶ Connect the player as described in 'Connecting to an A/V
receiver with multi-channel decoder'.
If your TV is equipped with a Dolby Surround™
decoder,
¶ Connect the player to the TV as described in 'Connecting
to a TV'.
Remote control battery
installation
Loading the batteries
1
Open the battery compartment cover.
2
Insert batteries as indicated inside the battery
compartment.
3
Close the cover.
Caution: Do not mix old and new batteries. Never
mix different types of batteries (standard, alkaline,
etc.)
TV
H
I
I
LEFT
AUX-
/O
FRONT
STEREO OUT
VIDEO OUT
II
TO TV-
I
/O
R
L
RIGHT
(CVBS)
(Y/C)
FRONT
AUDIO
VIDEO OUT
S-VIDEO OUT
P
REPARATION
17
Advertisement
Table of Contents
