Port Settings; Upnp Services - GrandTec GRAND Wi-Fi VIDEO SERVER PRO User Manual

7.15 Port Settings

User could change the port number that used by the video stream. The video stream utilizes the
RTP/RTSP protocol for delivering through the network. Click on "Port" in the Menu List for further settings.
RTSP Port: Specify the port number the user wants to use for RTSP. The default port is 554.
Control Port: Specify the control port the user wants to use for sending controlling message to
Wi-Fi Video Server Pro. The default port number is 21.
RTP Range Low/High: User might specify the range of the random port that used by RTP protocol.
The default range is from 50000 to 60000.
HTTP Port: User might change the default port used by HTTP protocol here. The default port
number is 80.
RTSP Over: Select the transferring protocol from AUTO, UDP or TCP.
Save button: Save and apply the configuration.
30

7.16 UPnP Services

Wi-Fi Video Server Pro supports UPnP function. Using this function, user could find Wi-Fi Video Server
Pro by just one click on "My Network Place" (Windows XP and later version). For further setting the UpnP
function, please click on the "UPnP" on the Menu List.
ON: Enable the UPnP function.
Discovery Enable: If this function is checked, a Windows user could find Wi-Fi Video Server Pro
in the My Network Place. About how to enable the UPnP function in the Windows, please refer to
"Section 9 Using UPnP to Connect to the Video Server"
UPNP HOSTNAME: Specify the host name for the UPnP function here.
NAT Traversal Enable: Enable/Disable NAT Traversal function. If Wi-Fi Video Server Pro is
located behind a router (uses a NAT network technology), and the router supports NAT Traversal
function, user might enable Wi-Fi Video Server Pro to negotiate with the router about the port
configuration via this function.
Off: Disable the UPnP function.
31