Audio Setup Menu; Analogue Output; Digital Audio Setup; Sound Mode - Philips DVP3007/94 User Manual

DVD Setup Menu Options

Audio Setup Menu

1
In disc mode, press SYSTEM MENU.
2
Press 1 2 to select 'Audio Setup' icon.
3
Press OK to confirm.
- - Audio Setup Page - -
Analog Output

Digital Audio Setup

Sound Mode

CD Upsampling

Night Mode
Go to Audio Setup Page
Analog Output
Set Analogue Output to match your DVD
Player's playback capability.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {ANALOG OUTPUT}, then
press 2.
Stereo
Select this option when output delivers
sound from only the two front speakers.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.
V SURR
Allows the DVD player to use virtual
surround sound effects.
Multichannel
Select this to enable Multi-channel output.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
26
DVP3007_94(eng)
Digital Audio Setup
The options included in Digital Audio
Setup are: 'Digital Output' and 'LPCM
Output'.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {DIGITAL AUDIO SETUP}, then
press 2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Press 3 4 to select a setting, then press
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off: Turn off the digital output.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful Hints:
– If DIGITAL OUTPUT is set to 'All', all
audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48kHz: Playback a disc recorded at
the sampling rate of 48kHz.
➜
96kHz: Playback a disc recorded at
the sampling rate of 96kHz that can only
be achieved in Stereo-Classic (Flat) mode.
Helpful Hint:
– LPCM Output can be selected only when
PCM Only is activated.
SYSTEM MENU
26
.
4/26/05, 11:05 AM