Need help fast? Read your User’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support 4/27/05, 3:18 PM DVP3005_94(Eng)
Due to the numerous versions of new CD-Audio copy protection or enhanced CD-Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD Player is fully compatible with such new discs. Should you have difficulty playing any such CD-Audio discs, kindly refer them to your CD- Audio disc retailer.
Page 3
"DTS" and "DTS Digital common and will be easy to complete. Surround" are registered trademarks Go to www.philips.com/support for of Digital Theater Systems, Inc . software upgrade. All Right Reserved. 4/27/05, 3:18 PM...
Contents Introduction Supplied accessories ... 6 Care and safety information ... 6 Connections Connecting TV ... 7-8 Using Composite Video jacks (CVBS) ... Using Component Video jacks (Pr Pb Y) ... Using an accessory RF modulator ... Connecting the power cord ... 8 Optional : Connecting to an Audio System .
Page 5
DVD Menu Options General Setup menu ... 22 Dimming system’s display screen ... OSD Language ... Sleep ... Screen Saver - turning on/off ... Audio Setup Menu ... 23 Setting the Downmix ... Digital Audio Setup ... Video Setup Menu ... 24-25 TV Type ...
Do not block the vents – Do not operate the DVD Player in an enclosed cabinet, allow about 10 cm (4 inches) of free space all around the player for adequate ventilation. PHILIPS 10 cm (4 inches) ● Care of the cabinet –...
Connecting TV COMPONENT VIDEO IN S-VIDEO V (Pr/Cr) AUDIO U (Pb/Cb) VIDEO IN COMPONENT VIDEO IN S-VIDEO V (Pr/Cr) AUDIO U (Pb/Cb) VIDEO IN IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV system.
RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator Use the composite video cable (yellow) to connect the DVD Player’s CVBS jack to...
Optional: Connecting to an Audio System STEREO Stereo system has Dolby Pro Logic or Right / Left Audio In jack Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV. Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding...
Functional Overview Front Panel STANDBY-ON B – To switch the DVD Player to Standby mode or ON Disc tray OPEN/CLOSE / – Open/Close the disc tray Display – Shows the current status of the DVD Player DVP3005_94(Eng) T NEXT – To search or select next chapter or track IR Sensor –...
Rear Panel Mains (AC Power Cord) – Connect to a standard AC outlet CVBS (VIDEO Out) – Connect to CVBS Video input of a TV YPbPr (Component Video Out) – Connect to YPbPr input of a TV Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
Functional Overview Remote Control RETURN / TITLE – To go back to previous menu / show title menu DISC MENU – Enters or exits the disc contents menu – Switches on or off the playback control mode (for VCD version 2.0 only) 1 2 3 4 –...
7-8 “Connecting TV”). Turn on the TV and set to the correct video-in channel. You should see the Philips DVD background screen on the Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details.
Getting Started Setting up Progressive Scan feature (for Progressive Scan TV only) The progressive scan display twice the number of frames per seconds than interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality.
To deactivate Progressive manually ● When the distorted picture still appears on the TV, it may be due to the connected TV does not accept progressive signals, and progressive is set by mistake. You must reset the unit to interlace format. Turn off your TV progressive scan mode or turn on to interlaced mode (refer to your TV user manual.)
Getting Started Step 3: Setting language preference You can select your preferred language settings. This DVD Player will automatically switch to the language for you whenever you load a disc. Setting the OSD Language The On-screen language for the system menu will remain as you set it, regardless of various disc languages.
“Setting up the TV”). Press STANDBY-ON on the DVD Player front panel. ➜ You should see the Philips DVD background screen on the TV. Press OPEN/CLOSE 0 button to open the disc tray and load in a disc, then press the same button again to close the disc tray.
Disc Operations Basic playback controls Unless otherwise stated, all operations described are based on Remote Control use. Pausing playback During playback, press PAUSEÅ. ➜ Playback will pause and sound will be muted. To resume normal playback, press PLAY B. Selecting track/chapter Press T / S briefly during playback to go to the next chapter/track or to return to the beginning of the current...
Operations for video playback (DVD/VCD/SVCD) Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load in the disc. To select a playback feature or item ● Use 1 2 3 4 keys or numeric keypad (0-9) on the remote, then press OK to start playback.
Disc Operations Special DVD Features Playing a Title Press DISC MENU. ➜ The disc title menu appears on the TV screen. Use 341 2 keys or numeric keypad (0-9) to select a play option. Press OK key to confirm. Camera Angle ●...
Playing MP3/JPEG (Kodak) Picture CD IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 13 “Setting up the TV”). ● Load a Picture disc (Kodak Picture CD, JPEG). ➜ For Kodak disc, the slide show will begin.
DVD Setup Menu Options This DVD Player setup is carried out via the TV, enabling you to customise the DVD Player to suit your particular requirements. General Setup menu In disc mode, press SYSTEM MENU. Press 1 2 to select ‘General Setup’ icon. Press OK to confirm.
Audio Setup Menu In disc mode, press SYSTEM MENU. Press 1 2 to select ‘Audio Setup’ icon. Press OK to confirm. General Audio Video - - Speaker Setup Page - - Downmix Digital Audio CD Upsampling Setting the Downmix This options allows you to set the stereo analog output of your DVD Player.
DVD Setup Menu Options Video Setup Menu In disc mode, press SYSTEM MENU. Press 1 2 to select ‘Video Setup’ icon. Press OK to confirm. General Audio Video - - Video Setup Page - - TY Type TV Display Progressive Sharpness Brightness Contrast...
Progressive - turning on/off In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player’s Y Pb Pr jacks to your TV that supports the progressive video input.
DVD Setup Menu Options Preference Page Press Ç twice to stop playback (if any), then press SYSTEM MENU. Press 1 2 to select the ‘Preference Page’ icon. Press OK to confirm. General Audio Video - - Preference Page - - Audio Subtitle Disc Menu...
Changing the Password This feature is used for Parental Control. Enter your six-digit password when prompted on the screen. The default password is 136900. In ‘PREFERENCE PAGE’, press 3 4 to highlight {PASSWORD}, then press 2 to select {CHANGE}. General Audio Video Old Password...
Completely distorted picture or black/white picture with DVD No sound or distorted sound No audio at digital output Visit us at www.philips.com/support for service support DVP3005_94(Eng) Solution – Check if the AC power cord is properly connected. – Press the STANDBY ON on the front of the DVD system to turn on the power.
Page 29
Player does not respond to some operating commands during playback. DVD Player cannot read CDs/DVDs Menu items cannot be selected Visit us at www.philips.com/support for service support DVP3005_94(Eng) Troubleshooting Solution – The DVD+R/CD-R must be finalised. – Ensure the disc label is facing up.
Specifications TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines Playback Multistandard (PAL/NTSC) VIDEO PERFORMANCE DA Converter 12 bit, 108 mHz YPbPr 0.7 Vpp — 75 ohm Video Output 1Vpp — 75 ohm VIDEO FORMAT Digital Compression MPEG 2 for DVD,SVCD MPEG 1 for VCD 50Hz 60Hz Horiz.
Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs.
Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian...
Page 34
Meet Philips at the Internet http://www.philips.com/support DVP 3005 CLASS 1 LASER PRODUCT sgpSL-0518/94-2 DVP3005_94_BackPage 05/05/05, 5:50 PM...