Table of Contents
Advertisement
Connections
Optional: Connecting to an
Audio System
STEREO
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1
Select one of the video connections
(CVBS VIDEO IN, SCART or
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Use the audio cables (white/red) to
connect AUDIO OUT [FRONT (L/R)]
jacks of the DVD Player to the
corresponding AUDIO IN jacks on the
stereo system (cable not supplied).
12
01-41 DVP5505S_EU_04
Optional: Connecting Digital AV
Receiver
AUDIO
IN
DIGITAL
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections
(CVBS VIDEO IN, SCART or
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3
Set the DVD Player's Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 28
"Digital Output").
Helpful Hint:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
12
AV Receiver
AUDIO
IN
DIGITAL
04_8239 300 34351
25/01/2005, 12:49 PM
Advertisement
Table of Contents
