Read your User’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support DVP5106K/93_1 01-42 DVP5106K_971 13/06/05, 11:04 AM...
Page 2
Theater Systems, Inc . U.S. Pat. Nois. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and world-wide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc . All Right Reserved. DVP5106K/93_1 13/06/05, 11:04 AM...
Page 3
DVD system may require a playability enhancement or upgrade. As DVD technology advances, these enhancements will become common and will be easy to complete. Go to www.philips.com/support for software upgrade. 01-42 DVP5106K_971 ‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS...
Due to the numerous versions of new CD-Audio copy protection or enhanced CD-Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD Player is fully compatible with such new discs. Should you have difficulty playing any such CD-Audio discs, kindly refer them to your CD- Audio disc retailer.
01-42 DVP5106K_971 Do not block the vents – Do not operate the DVD Player in an enclosed cabinet, allow about 10 cm (4 inch) of free space all around the player for adequate ventilation.
(or labeled as A/V In, Video In, Composite or Baseband) on the TV (cable supplied). To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/...
RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator Use the composite video cable (yellow) to connect the DVD Player’s CVBS jack to...
Connect the Audio Out for Center speaker and Subwoofer to the corresponding inputs on your Receiver (cable not supplied). Set the DVD Player’s Analog Output to ‘Multichannel’ to enable playback of DVDs recorded in Multi-channel. (see page 29 “Setting the analogue output”).
Connect the COAXIAL jack of the DVD Player to the corresponding Digital Audio In jack on your Receiver (cable not supplied). Set the DVD Player’s Digital Output to PCM-ONLY or ALL depending on the capabilities of your Receiver (see page 29 “Digital Output”).
Front and Rear Panels STANDBY-ON B – To switch the DVD Player to Standby mode or ON Disc slot – Insert disc here EJECT / – To eject the disc Display – Shows the current status of the DVD Player Mains (AC Power Cord) –...
– Disables or enables sound output Helpful Hint: Press “STOP” for few seconds to eject the disc. 01-42 DVP5106K_971 POWER B – To switch the DVD player to standby mode or ON 0-9 numerical key pad – Selects numbered items in a menu DISPLAY –...
9-10 “Connecting TV”). Turn on the TV and set to the correct video-in channel. You should see the Philips DVD background screen on the Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details.
1) Your TV can accept progressive signals, a progressive scan TV is required. 2) You have connected the DVD player to your TV using Y Pb Pr (see page 9.) Turn on your TV. Turn off your TV progressive scan mode or turn on interlaced mode (refer to your TV user manual.)
This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match. Press SYSTEM MENU. Press 2 repeatedly to select {VIDEO SETUP PAGE}.
{OTHERS}, then use the numeric keypad (0-9) on the remote to enter the 4-digit language code ‘XXXX’ (see page 5 “Language Code”) and press OK. Repeat steps for other language settings. SYSTEM MENU 13/06/05, 11:05 AM DVP5106K/93_1...
“Setting up the TV”). Press STANDBY-ON on the DVD Player front panel. ➜ You should see the Philips DVD background screen on the TV. Insert a disc in the disc slot. ➜ Make sure the label side is facing up.
Press REPEAT A-B again at your chosen end point. ➜ The section A and B can be set only within the same chapter/track. ➜ The section will now repeat continuously. To exit the sequence, press REPEAT A-B. DVP5106K/93_1 13/06/05, 11:05 AM...
Use the numeric keypad (0-9) to input the number/time or press 3 4 to make the selection, then press OK to confirm. ➜ Playback will change to the chosen time or to the selected title/chapter/ track. DVP5106K/93_1 13/06/05, 11:06 AM...
TITLE will return to the menu screen (if PBC is on). If you want to skip the index menu and playback directly from the beginning, Press DISC MENU key on the remote control to switch to PBC off. DVP5106K/93_1 13/06/05, 11:06 AM...
Subtitle files with the following filename extensions (.srt, .smi, .sub, .ssa, .ass) are supported but do not appear on the file navigation menu. – The subtitle filename have to be the same as the filename of the movie. DVP5106K/93_1 13/06/05, 11:06 AM...
– It is normal to experience an occasional pixelation during MPEG-4/DivX playback due to poor clarity of digital contents during internet downloading. – For multi-session discs with different formats, only the first session will be available. DVP5106K/93_1 13/06/05, 11:06 AM...
To quit simultaneous playback, press Ç. Helpful Hint: – Some files on Kodak or JPEG disc may be distorted during playback due to the configuration and characteristics of the disc. DVP5106K/93_1 13/06/05, 11:06 AM...
Video In channel. (See page 15 “Setting up the TV”). General Operation Connect a microphone (not supplied) to MIC on the front panel of the DVD player. Press KARAOKE repeatedly. ➜ ‘MIC ON/OFF’ appears on the TV screen.
This DVD Player setup is carried out via the TV, enabling you to customise the DVD Player to suit your particular requirements. General Setup menu In disc mode, press SYSTEM MENU. Press 1 2 to select ‘General Setup’ icon. Press OK to confirm.
Turn off the sleep function. Press 3 4 to select a setting, then press OK to confirm your selection. DivX(R) VOD registration code Philips provide you the DivX (Video On Demand) registration code that allows you to rent and purchase videos using the DivX ®...
If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid. LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’.
CDs four times higher than the original. Press 3 4 to select a setting, then press OK to confirm your selection. Helpful Hint: – CD upsampling feature is only applicable to stereo output setting. SYSTEM MENU 13/06/05, 11:06 AM DVP5106K/93_1...
In disc mode, press SYSTEM MENU. Press 1 2 to select ‘Video Setup’ icon. Press OK to confirm. TV Type This menu contains the options for selecting the colour system that matches the connected TV. For details, see page SYSTEM MENU 13/06/05, 11:06 AM DVP5106K/93_1...
DVD Setup Menu Options Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.
Choose zero (0) to balance the colour. Press 1 2 to adjust the setting that best suit your personal preference. Repeat steps for adjusting other colour features. Press OK to confirm. SYSTEM MENU 13/06/05, 11:06 AM DVP5106K/93_1...
You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. In ‘PREFERENCE PAGE’, press 3 4 to highlight {PARENTAL}, then press 2. SYSTEM MENU 13/06/05, 11:06 AM DVP5106K/93_1...
Select this to display all the files contained in the MP3/Picture CD. WITH MENU Select this to display only the folder menu of the MP3/Picture CD. Press 3 4 to select a setting, then press OK to confirm your selection. SYSTEM MENU 13/06/05, 11:06 AM DVP5106K/93_1...
Parental Control and Disc Lock. In ‘PREFERENCE PAGE’, press 34 to highlight {DEFAULT}, then press 2 to select {RESET}. Press OK to confirm. ➜ All settings will now reset to factory defaults. SYSTEM MENU 13/06/05, 11:06 AM DVP5106K/93_1...
Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers. – The test tone will be automatically generated to help you judge the sound level of each speaker. SYSTEM MENU 13/06/05, 11:06 AM DVP5106K/93_1...
Completely distorted picture or black/white picture with DVD No sound or distorted sound No audio at digital output Visit us at www.philips.com/support for service support 01-42 DVP5106K_971 Solution – Check if the AC power cord is properly connected. – Press the STANDBY ON on the front of the DVD system to turn on the power.
Page 39
Unable to select Progressive Scan on/off – Check that the output of the video signal is switch to No sound during DivX movies playback An MPEG-4 or DivX movies does not repeat Visit us at www.philips.com/support for service support 01-42 DVP5106K_971 Troubleshooting Solution –...
435 x 37 x 265 mm Weight Approximately 2.0 kg POWER CONSUMPTION Power Supply Rating 110 – 240V; 50/60 Hz Power consumption < 10 W Power consumption in Standby mode < 0.8 W Specifications subject to change without prior notice DVP5106K/93_1 13/06/05, 11:06 AM...
Each title is assigned a title number enabling you to locate the title you want. VIDEO OUT jack: Jack on the back of the DVD System that sends video to a TV. DVP5106K/93_1 13/06/05, 11:06 AM...
Meet Philips at the Internet http://www.philips.com/support DVP 5106K CLASS 1 LASER PRODUCT sgpSL-0524/97-1 DVP5106K/93_1 01-42 DVP5106K_971 13/06/05, 11:06 AM...
Need help?
Do you have a question about the DVP5106K and is the answer not in the manual?
Questions and answers