Parental Level; Change Pin - Philips DVP9000S/93 User Manual

Parental Level

Some DVDs may have a parental level
assigned to the complete disc or to
certain scenes on the disc. This feature
lets you set playback limitation level. The
rating levels are from 1 to 8 and are
country dependant. You can prohibit the
playing of certain discs that are not
suitable for your children or have certain
discs played with alternative scenes (if
available on disc).
VCD, SVCD, CD have no level indication,
so parental control has no effect on those
kinds of discs. This also applies to most
illegal DVDs.
Press 4 to {PARENTAL LEVEL}, then
press 1 2 to select a rating from 1 to 8
for the disc inserted.
Select "0" to deactivate Parental Level
Select a rating from 1 to 8; discs or
scenes with the same rating or lower will
play. Higher rated discs or scenes will not
play unless you enter your 4-digit
password.
Helpful Hint:
– Some DVDs are not encoded with a
rating though the movie rating may be
printed on the Disc cover. The rating level
feature does not prohibit play of such Discs.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
01-39 DVP900_69_Eng3
DVD Menu Options
Rating explanations
8 ADULT
– Mature material; should be viewed only by
adults due to graphic sexual material, violence or
language.
7 NC-17
– No children under age 17; not recommended
viewing for children under age 17.
5-6 PG-R
– Parental Guidance - Restricted; recommended
that parents restrict children under 17 from
viewing or allow to view only when supervised by
a parent or adult guardian.
4 PG13
– Material is unsuitable for children under age 13.
3 PG
– Parental Guidance suggested.
1-2G
– General Audience; recommended as acceptable
for viewers of all ages.
0 NO PARENTAL
– It will play all discs.

Change PIN

1
Press SYSTEM MENU and press 4 to
select {SETUP} menu.
2
Press 2 to select {ACCESS}.
Playback will stop.
3
Enter your four-digit password.
4
Press 4 to {CHANGE PIN}, then press 2
to enter the four-digit password again.
5
Enter the new four-digit password.
6
Enter the new four-digit password a
second time to confirm.
The new four-digit password will take
effect.
7
Press SYSTEM MENU again to exit the
{SETUP} menu.
Helpful Hint:
– If you forget the password, you can press
STOP key four times to reset the password
to the default settings (0000).
SYSTEM MENU
35
.
3139 246 13783
20/01/2005, 4:23 PM
35