Ignition WAL-L412 BP User Manual page 53

Symptom
The unit does not work, no light
No response to the DMX con‐
troller
The built-in battery can no longer
be recharged.
No connection can be established
to a W-DMX transmitter.
Remedy
Check the main switch on the bottom of the device.
Charge the device in the optional charging station.
1. Check the DMX connectors and cables for proper con‐
nection.
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to
high-voltage cables that may cause damage or interfer‐
ence to a DMX interface circuit.
Do not attempt to replace the built-in battery yourself.
Please contact our service centre.
Hold down the W-DMX button on the device until the
display expires. Press the Link button on your trans‐
mitter.
Troubleshooting
WAL-L412 BP
53
LED spotlight