Roller Up/ Roller Down; Manual Massage Program; Kneading; Swedish - Osaki OS-Hiro LT Instruction Manual

19/20.Roller up/ Roller down

The massage position adjustment button for spot and partial massage.
When the manual or automatic shoulder scanning can't meet individual, requirements,
you manual fine tune the shoulder height location by pressing up/ down button within
sound 10 seconds. Once appropriate location found release the key, the final position
will be lock.
Note:
In the spot or partial massage,you can also use these two buttons to adiust
the massage position.

Manual Massage Program

21.KNEADING

Kneading function Start Stop Control Button -5 levels of strength to be adjusted
Press this button to activate rhythmic mode 1 Kneading function for a full back
massage at medium strength. Press the button again to activate mode 2 Kneading
function. Press the button for the third time to stop Kneading function and switch to
mode 1 Swedish function.

21.SWEDISH

Swedish function Start/Stop Control Button -5 levels of speed to be adjusted.
When mode 2 Kneading function is engaged, press this button to activate rhythmic
mode 1 Swedish function for a full back massage at medium speed. Press this
button again to activate mode 2 Swedish function. Press once more to stop the
Swedish function. To activate Swedish function directly, press this button 3 times
during idle mode.
22.TAPPING
Tapping function Start/Stop Control Button-3 levels of width, 5 levels of speed to be
adjusted. Press this button to activate rhythmic mode 1 Tapping function for a full
back massage at medium speed. Press the button again to activate mode 2 Tapping
function. Press the button for the third time to stop Tapping function and switch to
mode 1 Shiatsu function.
15