Safety And Application Notes - dehn DEHNrecord DRC LC M1+ Operating Instructions Manual

3.

Safety and application notes

- Before use, the DEHNrecord DRC LC M1+ reader and the components included in delivery are
to be inspected for signs of damage. If damage is found, the reader or its accessories must
not be used.
- The device may only be used under the conditions shown and referred to in these operating
instructions.
- Modification of or tampering with the reader as well as adding or removing components not
intended for this purpose will threaten occupational safety, is impermissible and will void
warranty.
- The reader may only be used by electrically skilled persons in line with the relevant safety
regulations.
- If it must be assumed that safe operation of the device can no longer be ensured, it must be
withdrawn from service and secured against being switched on accidentally.
- Safe operation is no longer ensured if
- the device shows signs of damage
- electrolyte has leaked
- the device does not work any more
- fluids have penetrated the device
- the device has been inadequately stored and used
- the device has been stressed during transport
- High-energy electromagnetic fields with frequencies of about 125 Hz around the external
antenna may negatively affect the DEHNrecord DRC LC M1+ reader.
Page 5