Advertisement
Power Boost Zones
Only one burner may operate at Power Boost per zone at any given time. Please see the diagram
below for the zones. When setting power levels, always set the burner with Power Boost last.
General Cleaning
Apply approximately 1 tsp (5ml) of non-abrasive cleaner to the surface of the ceramic glass with
a lightly dampen cloth. Use a second cloth to remove any remaining cleaner residue. Wipe dry
with a dry cloth. For stubborn grime, use ordinary non-abrasive detergents or specific commercial
products. We strongly advise you not to use scouring pads, steel wool or acids for cleaning.
Do NOT use the following:
Glass cleaners which contain ammonia or chlorine bleach.
✖
Caustic cleaners or abrasive cleaners that may scratch or etch the surface.
✖
Metal scouring pads and scrub sponges.
✖
Powdery cleaners containing chlorine bleach.
✖
Flammable cleaners such as lighter fluid, brake cleaner, or WD-40.
✖
If sugar, sugar syrup, tomato products, or milk spills on the surface during heating, make
sure to clean immediately to prevent the heated sugar content from damaging the glass
surface.
Marks & Scratches
Be careful not to slide pots and pans across your cook top. It will leave fine markings and hairline
scratches which can be removed using a ceramic cooktop cleaner with specialized cleaning pads
for ceramic glass.
!
If the ceramic glass top is broken, turn off the unit and do not operate the cooptop with a
broken surface. The ceramic glass will need to be replaced. Please contact our customer
support for further assistance.
Zone 1
Zone 2
Zone 1
9
Zone 2
Advertisement
Troubleshooting
