Download Print this page

Kruger HUGO KCI30 User & Installation Manual page 13

Advertisement

INSTALLATION
!
This appliance must only be installed and used in rooms with permanent ventilation to local
standards.
Installation of the appliance and its connection to the electrical mains must only be carried
out by QUALIFIED PROFESSIONALS.
Before installation, it is important to check that the electrical mains are completely switched
off. KRUGER™ respectfully decline any liability for any damages arising from installation
in breach of the regulations in force or from failure to comply with the accident prevention
regulations.
Before Installing the Cooktop
1.
Visually inspect the cooktop for damage. Also make sure all cooktop screws are on tight.
2.
Record the model and serial number as found on the bottom of your cooktop. When ordering
parts for or making inquiries about your cooktop, always be sure to include the model and
serial numbers and a lot number or letter from the serial plate on your cooktop.
3.
Cut out countertop insert according to the dimensions of the cooktop on p.4
4.
Make sure the wall coverings, countertop and cabinets around the cooktop can withstand
heat (up to 200ºF) generated by the cooktop.
5.
Gently lower the cooktop into the countertop cut out. Do not seal the cooktop into the
countertop. The cooktop must be removable if service is necessary.
Do not obstruct
this space.
20"
B
A
4 1/2"
29" or 35"
depending
on model.
C
13
A. Width
B. Depth
C. Height

Advertisement

loading

This manual is also suitable for:

Hugo kci36