Advertisement
1.
INSTRUCTIONS OF REMOTE CONTROL
Operation in the following modes:
-
COOL / DRY / HEAT / AUTO / FAN.
-
Speed selection AUTO/HIGH/LOW/MEDIUM.
-
Temperature setting in the following ranges: 16ºC to
30ºC (61ºF to 86ºF).
-
Sleep Function.
-
Operation LED indicator.
-
Room temperature display.
-
7-days programmable. With daily On/Off function.
-
Battery included to maintain the clock time in case
of power failure.
-
Keypad lock to prevent non-authorised persons from
changing the settings.
Remote Control Functions:
A- DISPLAY
B- Keypad lock indicator
C- Fan speed indicator
D- Operation mode indicator
E- Sleep function indicator
F- Airswing indicator (not available)
G- Temperature indicator
H- Room temperature setting indicator
I-
Operation indicator
1- Operation LED
2- On/Off button
3- Fan speed selection button
4- SLEEP Function button
5- SWING (not available)
6- Temperature setting buttons. Temperature adjusts
in 1ºC steps.
Pressing both buttons simultaneously will change the
temperature from ºC to ºF.
7- Operation mode selection button.
To set the time
-
Press the CLOCK button (8).
-
Select the day of the week (DAY) (9).
-
Select the time a.m. or p.m. (HOUR) (10).
-
Select the minute (MINUTE) (11).
-
Press the CLOCK button (8).
Dimensiones: (Alto x Ancho x Prof.):120 x 120 x 21 mm
To set the weekly programmer
Programming the start of the unit:
1. Press ON TIMER (13).
2. Select the day of the week (DAY) (9), select the
time a.m. or p.m. (HOUR) (10), select the minute
(MINUTE) (11).
3. Go back to item 2 to select another day of the week, i f
you don't want to program one day, in hour select: __
4. Once programming is completed press ON TIMER
again.
Programming the stop of the unit:
1. Press OFF TIMER (14)
2. Select the day of the week (DAY) (9), select the
time a.m. or p.m. (HOUR) (10), select the minute
(MINUTE) (11).
3. Go back to item 2 to select another day of the week.
4. Once programming is completed press OFF TIMER (14)
again.
Erasing all programs:
- Press HOLD (12) for a few seconds.
Other functions
Keypad lock: to activate this function, press the "MINUTE"
(11) button 3 consecutive times. The keypad lock symbol
will appear on the screen. When the keypad is locked,
only the On/Off and fan speed functions are activated.
To unlock the keypad, press the "MINUTE" (11) key 3
consecutive times.
3
Advertisement
