Table of Contents
Advertisement
Video Setup Page
Progressive
Picture Setting
Personal Picture Setup
Brightness
Contrast
Sharpness
Color
HD JPEG
dvp5286K_98_eng.indd 43
Setup Menu Options
(underlined options are the factory default settings)
Before enabling the progressive scan feature, you must ensure
that your TV can accept progressive signals (a progressive scan
TV is required) and that you have connected this unit to your TV
using the Y Pb Pr. See 'Getting Started - Setting up Progressive
Scan feature' for details.
{ On }
–
{ Off }
–
Note: The Progressive Scan setting will not be available when
the HDMI video signal is detected.
This unit provides three predefined sets of picture color settings
and one personal setting which you can define yourself.
{ Standard }
–
{ Vivid }
–
{ Cool }
–
{ Personal }
–
0
0
0
0
HD JPEG allows you to enjoy untouched and uncompressed
pictures at it's original resolution. This feature is only applicable if
you have connected this unit to a HDMI-compatible TV/device.
{ On }
{ Off }
Note: This feature is only available for JPEG picture disc. This
unit supports the display resolution of 70p and above.
Turn on progressive scan mode.
Read the instructions on the TV and
confirm your action by pressing OK on
the remote control.
Turn off progressive scan mode.
Original color setting.
Vibrant color setting.
Soft color setting.
Select this to personalize the picture
color setting. Use the keys to
adjust to the setting that best suits your
personal preference and press OK to
confirm. For an average setting, select
{ 0 }.
–
Display high definition picture.
–
Display standard picture.
(continued)
2008-04-09 10:29:07 AM
Advertisement
Table of Contents
