Video Setup Page - Philips DVP6600 User Manual

Video Setup Page

TV Type
TV Display
Progressive
Picture Setting
Personal Picture Setup
Brightness
Contrast
Sharpness
Color
1_dvp6600_98_eng12_Final2.indd 37 1_dvp6600_98_eng12_Final2.indd 37
Setup Menu Options
(underlined options are the factory default settings)
Select the color system that matches the connected TV. It
enables playback of a different type of disc (PAL or NTSC disc)
on this unit.
{ PAL }
{ Multi }
{ NTSC }
The picture shape can be adjusted to fi t your TV.
{ 4:3 Pan Scan }
{ 4:3 Letter Box }
{ 16:9 }
Before enabling the progressive scan feature, you must ensure
that your TV can accept progressive signals (a progressive scan
TV is required) and that you have connected this unit to your TV
using the Y Pb Pr. See 'Getting Started - Setting up the
progressive scan feature' for details.
{ On }
{ Off }
Note: The Progressive Scan setting will not be available when
the HDMI video signal is detected.
This unit provides three predefi ned sets of picture color settings
and one personal setting which you can defi ne yourself.
{ Standard }
{ Vivid }
{ Cool }
{ Personal }
0
0
0
0
– For PAL-system TV.
– For TV that is compatible with both
PAL and NTSC.
– For NTSC-system TV.
– For a full-height
picture with the sides
trimmed.
– For a 'wide-screen'
display with black bars on
the top and bottom.
– For wide-screen TV
(frame ratio 16:9).
– Turn on progressive scan mode.
Read the instructions on the TV and
confi rm your action by pressing OK on
the remote control.
– Turn off progressive scan mode.
– Original color setting.
– Vibrant color setting.
– Soft color setting.
– Select this to personalize the picture
color setting. Use the
adjust to the setting that best suits your
personal preference and press OK to
confi rm. For an average setting, select
{ 0 }.
(continued)
keys to
37
2007-08-15 4:34:52 PM 2007-08-15 4:34:52 PM