Stop control indication
Battery indication
Function of two-position flip
R-flip
I-flip
Betriebsanleitung 810276BALDEEN090120
The seconds counter runs when releasing the
»reset button« and stops when a measuring
value is detected (indication may be discon-
nected).
full
Only active during measuring! In both directions the
measuring results will be reset and the seconds counter
set back to zero.
When switching to the left the measuring result will be stored,
when switching to the right measuring result will be deleted.
Switching to the left: the device is turned on.
When the device is turned on, by switching to the right the
menu may be selected.
Der Partner für Elektrostatik
empty
Stand 20.01.2008
SCHNIER
Seite 19 von 28