Indications - NDS Smart-in SM Series User Manual

6. INDICATIONS:

1
2
3
4
LED Indicators Green and Red:
The Green LED is ON when Inverter is switched ON and it is operational
1
The Red LED is ON only to show an alarm condition (Over Load, Over
Heat etc...)
Main Switch with 3 positions:
0 – Switch OFF the device
2
1 – Switch ON the device
2 – Switch ON/OFF the device from remote controller
USB port with 5V 1.2A output power, only to charge or supply your
3
tablet, smartphone etc...
4
AUX/Remote Control port to Switch ON/OFF the device from remote.
Output Outlets to connet and supply your AC Loads.
5
Plastic flanges to fix the inverter to floor or wall.
6
Input Power connectors + and – to connect to the 12V or 24V DC
7
battery bank.
Chassis ground screw connector for protection issue.
8
Fan holes for cooling issue
9
5
6
9
9
7
8