Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Simrad HC30
Summary of Contents for Simrad HC30
- Page 1 Manual Simrad HC30 Hand Controller...
-
Page 2: Table Of Contents
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, electronic or otherwise without prior permission from Simrad Navico Ltd. -
Page 3: General
2 Operation 1.1 Introduction 2.1 General The keypad of the HC30 has been designed to be as easy The Simrad HC30 hand controller brings the control of and intuitive to operate as possible. Using a simple key- Simrad cockpit pilots into the palm of your hand. Not... -
Page 4: Autotack
• While autotacking, the display will show the new tack selected - WIND S (Starboard) or WIND P (Port). • The HC30 will drop back to standby mode if no key is • In this mode, the autopilot automatically prevents tack-... -
Page 5: Advanced Features
ATM601 Masthead Transducer. tional receiver. • If no wind information is present, the HC30 will not Press Nav to activate Nav Mode (Fig 3.1). NAV will be select Sail To Wind Mode. -
Page 6: Alarms
3.3 Alarms 4 Configuration The HC30 will repeat any alarms sounded by the autopi- lot, such as GPS link lost etc (refer to autopilot manual for 4.1 Adjusting Gain more details of alarms). The Gain, or Rudder Ratio is the amount of steering cor-... -
Page 7: Compass Calibration
If the autopilot has an inbuilt fluxgate compass, it is pos- display will flash arrows pointing to Starboard, indicat- sible to calibrate it using the HC30. If an external ATC600 ing that it is necessary to either increase the boat speed or compass is fitted, this must be calibrated using a C600AD increase the angle of turn (Fig 4.5). -
Page 8: Installation
The hand controller HC30 is supplied with a tough mould- (Red) ed cradle that can be screwed to a convenient bulkhead using the supplied self-tapping screws, (drill 2.5mm pilot (Black) holes) ensuring that the HC30 is always to hand. As the Symptom Probable Cause Remedy (Green) -
Page 9: Spares & Accessories
6.3 Technical Summary 6.2 Spares & Accessories HAND CONTROLLER HC30 SPECIFICATIONS The following spares and accessories can be ordered from your local authorised Simrad agent. Please quote the relevant part when ordering. Supply Voltage 12v DC (10v-16v) Current Consumption 30mA (backlight off) -
Page 10: Service & Warranty
For Worldwide Warranty details, please refer to the Warranty Card supplied with this unit. A list of official worldwide Simrad simrad navico dealers is included in the Warranty Card. - Page 11 Manufacturer: Simrad Navico Star Lane, Margate Kent CT9 4NP United Kingdom Telephone: +44 (0) 1843 290290 Telefax: +44 (0) 1843 290471 E-Mail: simrad-navico.co.uk W O R L D W I D E M A N U F A C T U R E R...
Need help?
Do you have a question about the HC30 and is the answer not in the manual?
Questions and answers