Maintenance - Mitsubishi Electric LGH-F300RX5-E1 Operating Instructions Manual

Maintenance

intervals in order to prevent a deterioration in the Lossnay functions.
(or when [FILTER] and [CLEANING] are indicated on the remote
controller)
Clean the Lossnay cores once two year.
(Clean the Lossnay cores once a year If possible.)
Removing the parts
1) Maintenance cover
Open the door and lift off of the hinge brackets.
Maintenance cover
Hinge
Hinge
bracket
Models LGH-F300, F470, F600RX
2) Lossnay cores
Take hold of the handle and draw the Lossnay cores out from the
main unit.
-E1: ....................................... 4 cores
5
Lossnay core
Handle
Main unit
Models LGH-F300, F470, F600RX
-E1: ......................................
5
Filter stopper
Hinge Maintenance cover
Hinge
bracket
-E1 Model LGH-F1200RX -E1
5 5
-E1: ...................... 2 cores
5
Handle Main unit
Lossnay
core
-E1 Model LGH-F1200RX -E1
5 5
-E1: ...................
5
Filter guide
Use a vacuum cleaner to remove light dust. To remove stubborn
dirt wash in a mild solution of detergent and lukewarm water.
Vacuum cleaner
2) Lossnay cores
Use a vacuum cleaner to suck up the dust and dirt on the exposed
surfaces of the Lossnay cores.
Use a soft brush only to clean exposed surface areas.
Vacuum cleaner
(with brush attachment)
Corner
Note
3
Lossnay core
It may