▍
Hardware Setup
Memory
These DIMM slots are used for installing memory modules.
1.
unlock the diMM slot by pushing the mounting clip to the side. Ver-
tically insert the memory module into the diMM slot. the memory
module has an off-center notch on the bottom that will only allow it to
fit one way into the diMM slot.
2.
push the memory module deep into the diMM slot. the plastic clip
at side of the diMM slot will automatically close when the memory
module is properly seat and an audible click should be heard.
3.
Manually check if the memory module has been locked in place by
the diMM slot's side clip.
important
•
you can barely see the golden finger if the diMM is properly inserted
in the diMM slot.
•
to enable successful system boot-up, always insert the diMM into
the diMM1 first.
2-4