[Component Output]
Option
Description
[480i/576i]
Set the resolution for the
component output picture.
[480p/576p]
•
The selected resolution
[720p]
must also be supported
by your TV monitor.
[1080i]
•
Refer also to your TV's
manual.
•
If you have selected the
resolution not supported
by your TV by mistake
and the picture gets
disturbed, press PLAY
panel for 5 seconds to
change the setting back to
its default.
•
When HDMI cable
is connected, only
[480i/576i] and the
resolution selected in the
[HDMI Video Resolution]
will be available.
Note
•
With regard to the DVD Video with a copy
protection, the resolution will be set to 480p/576p
regardless of the setting here. If 480p/576p output is
not available, 480i/576i will be output.
[De-interlacing Mode]
Option
Description
[Auto]
Automatically detects the
fi lm or the video content,
and appropriately converts it.
[Video]
Select this setting when the
picture is distorted when
using [Auto].
and hold on the front
[Noise Reduction]
•
No available for BD-video.
Option
Description
[Off]
Deactivate the noise
reduction.
[MPEG NR.]
Reduce the block noise seen
characteristically in the MPEG
fi les.
[3D NR.]
Reduce the rough
background noise so that you
can feel the greater feeling of
depth.
[Combo
Activate both [MPEG NR.]
(3D+MPEG)]
and [3D NR.].
EN
33