[Parental] Settings - Philips BDP7200/98 User Manual

[Digital Out]
• When HDMI cable is connected, make sure
[HDMI Audio] setting is set to [Off] before
you change this setting. Refer to chapter
'Set-up - Set digital output format' for more
information.
Option Description
[Bitstream]
Set the audio format for the
sound output from the
[PCM]
DIGITAL OUT (COAXIAL/
OPTICAL).
[Analogue Audio]
• When HDMI cable is connected, make sure
[HDMI Audio] setting is set to [Off] before
you change this setting.
Option Description
[Speaker Setup] Set the speaker confi guration
to suite the size/number of
your speakers. Refer to
chapter 'Set-up - Speaker
setup' for more information.
• You can also output
the test tone from each
speaker by pressing
button.
[Speaker • [Unit] :
Distance]
measure system, default
setting is [Feet]. This
measure system will be
used for the speaker
distance setting.
• Select the distance from
the listening point to the
speaker to get the ideal
delay time.
[Speaker Level] Set the volume level for each
speaker to get the ideal audio
balance.
Red
set the desired

[Parental] settings

[Rating Level]
• Refer to chapter 'Set-up - Set parental lock'
for more information.
Option Description
[All] Set the rating level for the
disc playback.
8 [Adult]
to
1 [Kid Safe]
[New PIN]
Option Description
Set the new password for
the [Parental] setting.
EN 35