Halfords HDC100 Manual page 7

HDC200 & HDC300
1. SUCTION CUP
Ensure glass is clean and dirt free before mounting (when removing pull rubber tab)
MOUNT CLAMP
2.
Ensure suction cup is pressed firm against glass before clamping down (pull to release when removing
dash cam)
MINI USB SOCKET
3.
Connect the supplied 12V power cable here
MOUNT ADJUSTMENT
4.
Use to adjust camera angle accordingly
MAGNETIC MOUNT DOCK
5.
Attach supplied magnetic mount here
UP / DOWN BUTTON
6.
Use to navigate menu
MEMORY CARD SLOT
7.
Insert MicroSD Card here
REAR CAMERA (HDCR) CONENCTION (HDC300 ONLY)
8.
Plug rear camera (HDCR) cable into here
LOCK FILE BUTTON
9.
Press once to lock current recording file
MIC
10.
Records audio during video recording
MENU BUTTON / SNAPSHOT
11.
Press once to enter dash cam settings menu / during recording press to take instant snapshot
RESET (recommend suitable size paperclip)
12.
Use small pointy object to insert and press once to hard reset the dash cam
REC BUTTON (ALSO OK BUTTON)
13.
Press once to start/stop recording / press once to use as OK when in menus
MODE BUTTON
14.
Press once to switch modes
POWER BUTTON
15.
Press once to switch dash cam ON / Hold down to power OFF
6