Settings - Halfords HDC100 Manual

SETTINGS

The options and settings available on the dash cam are described below.
Select the chosen setting option using the up and down buttons and press the OK button to confirm.
HDC400 refer to APP settings in user manual (see Page 12-19).
DATE/TIME
Set the date & time on the dash cam by using the up and down buttons to change the options.
Press MODE to switch between Year, Month and Day
(MODE long press HDC100 only).
Press the REC/OK button to save the changes
To change this select Menu (Setup) > Date/Time
G‐SENSOR
G Sensor sensitivity can be adjusted. This is what detects forces which will automatically protect the
current recording in a collision.
The default setting for this will be set to medium sensitivity
To change this select Menu (Setup) > G‐Sensor > Low/Mid/High
DEVICE SOUNDS
The default setting for this will be set to ON
To change this select Menu (Setup) >Device Sounds >Off/On
LANGUAGE
The default setting for this will be set to English
To change this select Menu (Setup) > Language
23