Halfords HDC100 Manual page 2

WARNING!
The Dash cam must not be fitted in a position which obscures the driver's view of
the road ahead.
Depending on the country of use, recordings made with this device may be
subject to Data Protection Laws. Ensure these are complied with.
If the dash cam is to be used in a commercial environment e.g. taxi or truck, then
CCTV Regulations may apply.
Playback of video which is visible to the driver whilst the vehicle is in motion is
prohibited in some countries.
Only use the supplied power adaptor, otherwise damage may occur to the dash
cam.
Take care when cleaning the dash cam lens and only use a suitable lens cleaner
and a soft cloth.
Do NOT expose this product to rain, moisture or water under any circumstances;
doing so may result in the risk of electric shock or fire.
Do NOT perform servicing other than that contained in the instruction manual,
unless you are qualified to do so.
When installing in a vehicle, always place the device securely against the
windscreen and where possible conceal the power cable under the vehicles
interior trim. Make sure that the power cable doesn't interfere with the driver's
controls such as the steering wheel, pedals or gear lever.
Do NOT mount the dash cam in front of an airbag deployment area or in a
position to obscure any interior mirrors.
Do NOT operate whilst driving and only adjust settings or review recordings whilst
stationary.
If in any doubt or for more help and guidance on the installation and operation of
your HDC please do not hesitate to contact our technical helpline
0113 2137452 support@myhdchelp.com