Halfords HDC100 Manual page 12

HDC400
Check placement on windscreen before fitting. Ensure camera isn't causing any obstructions to the
driver's view of the road and also ensure the power cable can be easily inserted into mount. Please
ensure you have Dash Cam in correct position before applying adhesive mount to windscreen.
Clean area for mounting to ensure it is dust/grease free
Ensure removal of plastic film from adhesive pad
Push adhesive pad onto window in required mounting location
Plug power cable into mini USB connection on mount
HDCR
Check placement on windscreen before fitting. Ensure camera isn't causing any obstructions to the
driver's view of the road and also ensure the power cable can be easily inserted into mount. Please
ensure you have Dash Cam in correct position before applying adhesive mount to windscreen.
Check positioning before fully fitting. Mount can be turned round depending on the angle of your
windscreen to achieve best view.
Ensure removal of plastic film from adhesive pad
Clean area for mounting to ensure it is dust/grease free
Push adhesive pad onto window in required mounting location
INSTALLING REAR CAMERA – HDCR
(HDC300 & HDC400 only)
Route the cable through the vehicle. It should be hidden behind the vehicle trim and rubber door
seals where possible.
Take the Rear Dash Cam cable and connect it to the Front Dash Cam.
Check placement on windscreen before fitting. Ensure camera isn't causing any obstructions to the
driver's view of the road and also ensure the power cable can be easily inserted into mount. Please
ensure you have Dash Cam in correct position before applying adhesive mount to windscreen.
11