Electrolux END52800X User Instructions page 11

Care and maintenance
Changing the light bulb
•Refrigerator Light
1. Switch off the power at the power point and
remove the refrigerator's electric cord fromthe
power point.
2. Carefully unclip the light cover. You do this by
pulling the light cover tab at the reartowards the
front of the cabinet.
3. Unscrew the light bulb and replace it with a bulb
that is the same as the original (25 watts)
4. Replace the light cover by hooking the light cover
lugs into the front of the housing and pressing the
rear of the cover up until it clips in.
5. Wait 5 minutes to ensure pressures in the
refrigeration system are equalized. Then turn the
refrigerator on at the power point.
electrolux refrigeration care and maintenance 11
• Freezer light (where fitted)
1. Switch off the power at the power point and
remove the refrigerator's power cord from the
power point.
2. Carefully unclip the light cover. You do this by
pulling the light cover tab at the rear towards the
front of the cabinet.
(electronic models only)
3. Unscrew the light bulb and replace it with a bulb
that is the same as the original.
4. Replace the light cover by hooking the light cover
lugs into the front of the housing and pressing the
rear of the cover up until it clips in.
5. Wait 5 minutes to ensure pressures in the
refrigeration system are equalized. Then reconnect
and turn the refrigerator on at the power point.
Top freezer model