Port Led State Indicators - Avaya 4000 Series Installing

Installing the Avaya VSP 4000 4450GTX-HT-PWR+

Port LED state indicators

This section describes the port LED state indicators by color and fluctuation cues.
Note:
Indicator states are applicable to the 4450GTX-HT-PWR+ model of VSP 4000 switches.
The following list describes the three port LEDs:
• Activity indicates the level of activity on the link.
• Link indicates the presence of an Ethernet link.
• Speed indicates the port speed (for example, 10 Mb/s, 100 Mb/s, 1000 Mb/s).
Table 17: RJ-45 Port LED state indicators
Label Color and Status
Speed/PoE+ Green, Blink
Green, Steady
Amber, Blink
Amber, Steady
Amber, Green Pulse
Off
Link / Activity Green, Steady
Green, Blink
Green, Slow Blink
Amber, Steady
Amber, Blink
Off
Table 18: SFP/SFP+ transceiver Port LED state indicators
Label Color and Status
In Use Green, Blink
Green, Steady
Amber, Blink
Amber, Steady
Off
Link / Activity Green, Blink
Green, Slow Blink
Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+
34
Description
The port is set to operate at 1000 Mb/s with PoE.
The port is set to operate at 1000 Mb/s without PoE+.
The port is set to operate at 100 Mb/s with PoE+.
The port is set to operate at 100 Mb/s without PoE+.
The port is experiencing a PoE+ error.
When the Link/Activity LED is green and the Speed LED is off,
the port is set to operate at 10 Mb/s for all models.
The link established but no data activity exists.
The link is established and data activity exists (the blink rate
indicates the level of activity).
The software disabled the port.
Port disabled.
Port not used.
Not applicable.
Description
Not applicable.
The SFP/SFP+ port and the transmit port are active.
Not applicable.
SFP/SFP+ Installed—TX Port Inactive
No SFP/SFP+ transceiver is present.
Activity exists on the port.
Software disabled this port.
Comments? infodev@avaya.com
August 2014