Table of Contents
Advertisement
Figure 25. Installing the service access cover on a stand-alone model
Removing the front cover from a rack-mounted 8203-E4A, 8204-E8A,
8261-E4S, 9407-M15, 9408-M25, or 9409-M50
Use this procedure to remove the cover to access components or perform service.
1. Remove the two thumbscrews (A) that secure the system to the rack (B) as shown in the following
figure.
2. Push in the release latches (C) and pull the cover away from the system.
36
Control panel, control panel fillers, and signal cables
Hide quick links:
Advertisement
Table of Contents
